Ventis HE350 Zero Clearance Wood Fireplace
From $4,999.00
To $8,449.00
VENTIS ZERO CLEARANCE WOOD FIREPLACES HE350
Features
- Size: 50 Inches
- Color: Black
- Product Dimensions: 50 3/4" W x 43 3/8" H x 26 7/8" D
- Non-catalytic
- 2020 EPA certified
- Adjustable burn rate
- Burns up to 12 hours
- 4.3 cubic feet firebox
- Can hold 60 lb. of wood
- CSA B415.1-10 certified
- Emissions below 1.6 g/hr.
- 69.7% optimum efficiency
- Includes Ventis anchor plate and blower
- Metallic black traditional styled face-plate
- Fully brick lined with molded refractory bricks
Technical Specifications
- Technical Specifications
- Framing Dimensions: 50 3/4" W x 43 3/8" H x 26 7/8" D
- Venting Dimensions: 8" ID
- Recommended Heating Area: Up to 2,800 sq. ft.
- Glass Viewing Area: 403 sq. inches
- Maximum Log Size: 25"
Additional Features:
-
Traditional Style Face-Plate-Metallic Black
-
4.3 cu. ft. Firebox Volume
-
Adjustable Burn Rate
-
Burn Time Up to 12 Hours
-
Non-Catalytic
-
Fully Brick Lined With Molded Refractory Bricks
-
CSA B415.1-10 Certified
-
Anchor Plate and Blower Included
-
Efficiency Topping 69% and Emissions Below 1.6 g/h
The luxurious effect created by this fireplace is just as impressive as its heating capacity. Moreover, it is a responsible choice for heating your home and caring for the environment. Large fireplace. Behind its large glass door, the 4.28 cubic foot combustion chamber can hold an impressive 60 lb of wood. Low emissions. This energy efficient fireplace complies with the EPA’s clean-air standards (only 1.6 g/h of emissions). High efficiency. The HE350 fireplace is capable of heating large spaces and burns for 10 hours. A hot start is always your best guarantee for a clean burn. The HE350 uses an automated combustion air intake system that allows the fire to reach an ideal temperature before going into slow burn mode. The result is very low emissions, without the need for a catalytic combustor.
-
Designed mainly for heating large spaces
-
Luxurious effect created by an eye-catching fireplace ▪ Large glass surface
-
Non-catalytic combustion technology
-
Durable C-Cast baffle
-
8" Ventis stainless steel anchor plate included
-
Fresh air intake adapter included
Specifications
*Venting Requirements: This unit requires venting pipe with an inner diameter of 8 Inches. Please see the Venting Components section on this page if available for venting pipe that must be used with this unit.
* Please Note: This unit includes an anchor plate for Ventis All-Fuel chimney. If another approved chimney system is to be installed, an anchor plate for that system will need to be purchased.
The Ventis HE350 is a triumph in zone heating technology. Behind those big doors is a large capacity fireplace that can hold 60 pounds of wood. Not only that, this fireplace gives you high efficiency that complies with the EPA's clean-air standards. This Ventis fireplace will heat the room it's in as well as any room it's connected to. With a maximum burn time of 10 hours you will get warm and stay warm.
| Set Product as Sales | No |
|---|---|
| Set Product as Featured | No |