Osburn 1700 Wood Stove

OVERVIEW

Designed to meet the needs of smaller spaces, the Osburn 1700 combines robustness and elegance to allow you to enjoy your heating experience with confidence. This unit is equipped with high-density bricks, a cast iron door, a built-in ash pan, a top heat deflector that redirects heat to the front of the unit, and side panels to reduce its clearances.

Choose your favorite version by customizing the unit to suit your style: refined door overlays, new leg designs, glass ash lip; significant innovations for the most seasoned experts. Exceeding air quality regulations with emissions as low as 1.26 g/h, the Osburn 1700's efficiency will save you time and money.

Required to complete the wood stove:

Door Overlays
Pedestal/Leg Kits

Appliance Performance

Fuel type :	Dry cordwood
Recommended heating area-ft² : ⁽⁾	500 - 1,800
Overall firebox volume :	1.9
EPA loading volume-ft³ :	1.44
Maximum burn time : ⁽¹⁾	6 h
Maximum heat output (dry cordwood) : ⁽²⁾	65,000 BTU/h (19 kW)
Overall heat output rate < : ⁽²⁾ ⁽³⁾	15,650 BTU/h (4.6 kW) to 23,300 BTU/h (6.83 kW)
Average overall efficiency (EPA cribs/Douglas fir) : ⁽³⁾	N.A. (HHV) ⁽⁴⁾	N.A. (LHV) ⁽⁵⁾
Average overall efficiency (dry cordwood) : ⁽³⁾	70 % (HHV) ⁽⁴⁾	75 % (LHV) ⁽⁵⁾
Optimum efficiency : ⁽⁶⁾ ⁽⁷⁾	78 %
Average particulate emissions rate : ⁽⁸⁾	1.26 g/h
Average CO : ⁽⁹⁾	58 g/h

⁽¹⁾ Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.

⁽⁾ Recommended heating area and maximum burn time may vary subject to location in home, chimney draft, heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.

⁽²⁾ The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb./ft³ and 20 lb./ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb./ft³ and 12 lb./ft³. The moisture content is between 19% and 25%.

⁽³⁾ As measured per CSA B415.1-10 stack loss method.

⁽⁴⁾ Higher Heating Value of the fuel.

⁽⁵⁾ Lower Heating Value of the fuel.

⁽⁶⁾ Performances based on a fuel load prescribed by the standard at 7 lb./ft³ and with a moisture content between 19% and 25%.

⁽⁷⁾ Optimum overall efficiency at a specific burn rate (LHV).

⁽⁸⁾ This appliance is officially tested and certified by an independent agency.

⁽⁹⁾ Carbon monoxide.

General Features

Combustion technology	Non-catalytic
High-efficiency certified appliance	Yes, EPA 2020 approved
Maximum log length	18"
Log positioning	Over width
Chimney diameter	6"
Flue outlet diameter	6"
Type of chimney	CAN/ULC S629, UL 103 HT (2100 °F)
Minimum chimney height (feet)	15'
Baffle type	C-Cast
Approved for an alcove installation	Yes
Approved for a mobile home installation	Yes, with fresh air intake
Shipping Weight	331 lb. (150 kg)
Door type	Single, glass with cast iron frame
Glass type	Ceramic glass
Glass surface – dimensions (Width X Height)	15 3/4" x 9 3/8"
Glass air-wash system	Yes
Overall dimension (Height)	30 3/8"
Overall dimension (Width)	24 7/8"
Overall dimension (Depth)	23 1/4"
Door opening – dimension (Height)	8 3/4"
Door opening - dimension (Width)	17 1/4"
Firebox – dimension (Height)	11 7/8"
Firebox – dimension (Width)	19 5/8"
Firebox – dimension (Depth)	13 1/2"
Firebox lined with refractory bricks for better heat distribution	Yes
Stainless-steel secondary-air system improving gas combustion	Yes
Steel thickness – body	3/16"
Steel thickness – top	5/16"
USA standard (emissions)	EPA
Canadian Standard (emissions)	CSA B415.1-10
USA standard (safety)	UL 1482, UL 737
Canadian standard (safety)	ULC S627
Tested and listed as per applicable standards	By an accredited laboratory (CAN/USA)
Warranty	Limited lifetime

Specifications

BTU	65,000 BTU
Heating Capacity	500-1,800 sq. ft.
Firebox Size	1.9 cu ft.
Log Length	up to 18”
Flue Pipe Diameter	6”
Weight	331 lbs.
Width	24 7/8”
Depth	23 1/4”
Height	30 ⅜”
Height with Legs	29”
Mobile Home Approved	Yes

Configuration

1700 Wood Stove with Black Door Overlayand Black Cast Iron Traditional Legs with Ash Drawer
1700 Wood Stove with Black Door Overlay and Pedestal with Ash Drawer
1700 Wood Stove with Black Door Overlay and Black Cast Iron Straight Legs with Ash Drawer
1700 Wood Stove with Black Door Overlay and Brushed Nickel Cast Iron Traditional Legs with Ash Drawer
1700 Wood Stove with Black Door Overlay and Brushed Nickel Cast Iron Straight Legs with Ash Drawer
1700 Wood Stove with Brushed Nickel Door Overlay and Black Cast Iron Traditional Legs with Ash Drawer
1700 Wood Stove with Brushed Nickel Door Overlay and Pedestal with Ash Drawer
1700 Wood Stove with Brushed Nickel Door Overlay and Black Cast Iron Straight Legs with Ash Drawer
1700 Wood Stove with Brushed Nickel Door Overlay and Brushed Nickel Cast Iron Traditional Legs with Ash Drawer
1700 Wood Stove with Brushed Nickel Door Overlay and Brushed Nickel Cast Iron Straight Legs with Ash Drawer

*NOTE: Shown with required door overlay and pedestal or leg kit (not included). The door overlay and pedestal or leg kit must be purchased to complete this unit

Options

130 cfm Blower with Variable Speed Control (Thermodisc Included) --- provide mechanical convection of heat to the room
5" Fresh Air Intake Kit for Wood Stove on Legs --- enable outside combustion air to feed into your appliance making the fireplace more efficient
5" Fresh Air Intake Kit for Wood Stove on Pedestal --- allows outside combustion air to be supplied to the stove
5" X 4' Insulated Flex Pipe for Fresh Air Intake Kit --- consists of a 4 ft. length of 5 in. diameter flexible insulated pipe, fits on fresh air kit adaptor
Glass Ash Lip --- keeps the stove's surrounding area clean
Rigid Firescreen --- enhances crackle of your fire

Accessories

Blowers

Heat Powered Stove Fan (105 Cfm)

--- increases the heat flow and balances the room temperature, starts automatically when surface temperature of stove reaches around 149'F

Adhesives, Gaskets and Insulation

High Temperature Red Silicone (300 ml - 10.1 fl.oz.)
High Temperature Clear Silicone (300 ml - 10.1 fl.oz.)

Paint

Metallic Black Stove Paint – 342g (12oz) Aerosol

--- adheres well and dries quickly and retains color well over time

Maintenance Products

Start-Up Kit --- comes with some high quality gloves, glass cleaner, a digital moisture reader, and a double wall stove pipe probe thermometer
Ash Vacuum Cleaner --- designed almost exclusively for ash collection
6" Round Brush with Polypropylene Bristles (3/8" NPT) --- efficiently cleans chimneys and convenient loop for hanging
Pull Ring (3/8" NPT) --- securely connects to brushes and give you that extra safety while you use your chimney rod
5' Fibreglass Rod (3/8'' Npt) --- perfect rod for cleaning chimneys enabling you to install a number of accessories or extenders
Kevlar Thread Wood Stove And Fireplace Gloves --- gloves are recommended for a safe and clean use with any type of wood-burning appliance.
19" Kevlar Thread Sewn Fireplace Gloves --- cover the entire forearm to protect against heat sources
Dry Cleaning Pad --- easily cleans the soot from glass without water
Wood Appliance Glass Cleaner (500ml - 16.9fl.oz.) --- recommended for cleaning the glass of any type of wood-burning appliance